Marble, with its unique texture and noble feel, has become the “appearance standard” in home decoration, but the delicate nature of natural stone also deters many people. In fact, by mastering scientific maintenance methods, marble can remain as good as new for a long time. The following is a comprehensive guide to the maintenance of marble from dimensions such as daily cleaning and maintenance of key scenarios.

 I. Daily Cleaning: Three Core Principles, Reject “Excessive Maintenance”

1. Selection of cleaning tools and cleaning agents: Gentleness is the top priority

For daily cleaning, use a soft microfiber cloth or cotton towel to avoid rough scouring pads or steel wool balls scratching the surface. For daily stains (dust, water stains) : Dilute with clean water or a neutral pH cleaner (such as mild soapy water) and then wipe. Avoid using acidic (such as lemon juice, vinegar) or alkaline (such as laundry detergent, bleach) cleaners, otherwise it will corrode the calcium carbonate component on the stone surface, resulting in a decrease in luster. If you encounter stubborn stains (coffee, soy sauce) : Immediately use a damp cloth to absorb the liquid, then gently wipe with a neutral cleaner. Do not rub hard.

2. Cleaning frequency and steps: “Timely” is more important than “frequent”

For daily cleaning, gently wipe the surface with a dry or slightly damp cloth to remove dust and loose dirt. For deep cleaning, use a neutral detergent mixed with water (1:100) to wipe, then rinse with clean water and dry (a humid environment can easily cause the marble to absorb water and turn yellow). Avoid directly rinsing the floor or countertop with a large amount of water (especially for dark marble), as water seeping into the crevices may cause alkali efflorescence and mold spots.

3. Drying treatment: Eliminate the “moisture hazard”

After wiping, dry it promptly with a dry cloth, especially in areas prone to water accumulation such as the edges of the countertop and the corners of the floor. It is recommended to install an exhaust system on the marble walls of the bathroom to reduce the long-term erosion of water vapor.

 II. Key Scene Maintenance: Differentiated maintenance for the kitchen, bathroom, and floor

1. Kitchen marble countertop: Anti-stain and anti-seepage are the key

Newly installed marble countertops are recommended to undergo “sealing and protective treatment” (professional personnel use stone sealant) to form a protective film and reduce the risk of juice and oil stains penetrating. Generally, resealing is required every 1-2 years. Surface stains should be cleaned immediately. After spilling colored liquids such as soy sauce and tomato sauce, immediately absorb them with a paper towel and then wipe with a neutral cleaner to prevent pigments from seeping into the texture. Hot POTS and hot oil kettles need to use heat insulation pads. Although marble can withstand high temperatures, thermal expansion and contraction may cause cracking. In addition, marble also needs regular deep care. Every month, gently wipe the countertop with a special marble polish (containing tiny abrasive particles) to restore its luster (be sure to avoid the cracks).

2. Marble walls/floors in the bathroom: Both anti-slip and anti-mold properties are emphasized

It is necessary to pay attention to anti-slip treatment. If there is water on the ground, it should be wiped off in time to avoid the smooth marble from slipping when it gets wet. Spray anti-slip agent regularly (especially in the shower area). Do a good job in anti-mold cleaning. Wipe the walls with diluted neutral detergent every week, with a focus on removing scale and soap scum near the floor drain and in the gaps between tiles. If mold spots appear, you can mix baking soda and water to form a paste and apply it. Let it stand for 10 minutes and then wipe it clean. Gap maintenance: Fill the joints of the marble in the bathroom with anti-mold glass glue. Check once a year. If any cracking or peeling is found, reapply the glue in time.

3. Marble floor: Dual protection of wear resistance and gloss

Anti-scratch at the entrance: Lay a dust-proof pad at the entrance hall to reduce the scratches on the ground caused by sand and stones from the soles of shoes. Rubber foot pads are installed on the legs of the furniture to prevent scratches when dragging. Regularly polish and grind. For light scratches (such as furniture friction marks), apply special polishing wax for marble and repeatedly wipe with a soft cloth.